Home Up Contact Us Feedback Search

 DC Loads Prog Power Supplies AC/DC Converters DC/DC Converters DC/AC Inverters Linear Supplies Battery Chargers UPS Prewired Systems Custom Built Rail Industry

LD Series
ZUP Series
ZAS Series
GEN Series
XFR Series
ZPS Series
LABHP Series
LABTC Series

 

Programmable DC Power Supplies

 
 
Product Range
 
LD Series            30W-1000W
Linear regulated, High accuracy
Voltage ranges from 0 - 7.5Vdc to 0 - 150Vdc, Current ranges from 0 - 0.5A to 0 - 20A
Remote programming of voltage and current, Remote sense, Parallel & master/slave operation.
Optional IEEE 488.2 interface with LabVIEW driver 
ZUP Series         200W-800W
Low noise switched mode design
Voltage ranges from 0 - 6Vdc to 0 - 120Vdc, Current ranges from 0 - 1.8A to 0 - 132A
Remote programming and monitoring of voltage and current, Built in RS232/485, Remote sense. Optional IEEE 488.2 interface
ZAS Series         600W-2.4kW
Low noise switched mode design
Voltage ranges from 0 - 20Vdc to 0 - 120Vdc, Current ranges from 0 - 5A to 0 - 80A
Remote programming and monitoring of voltage and current, Remote sense
Optional RS232/485, IEEE 488.2 interface
GEN Series         750W-15kW
Low noise switched mode design
Voltage ranges from 0 - 6Vdc to 0 - 600Vdc, Current ranges from 0 - 1.3A to 0 - 600A
Remote programming and monitoring of voltage and current, Built in RS232/485, Remote sense
Optional IEEE 488.2 interface
XFR Series         1.2kW-2.8kW
Low noise switched mode design
Voltage ranges from 0 - 7.5Vdc to 0 - 600Vdc, Current ranges from 0 - 2A to 0 - 220A
Remote programming and monitoring of voltage and current, Remote sense
Optional IEEE 488.2 interface
ZPS Series          3kW-30kW
Low noise switched mode design
Voltage ranges from 0 - 20Vdc to 0 - 400Vdc, Current ranges from 0 - 10A to 0 - 400A
Remote programming and monitoring of voltage and current, Remote sense, Parallel & master/slave operation up to 3 units.
Optional IEEE 488.2 interface with LabVIEW driver
LAB-HP Series          5kW-15kW
Low noise switched mode design
Voltage ranges from 0 - 40Vdc to 0 - 1200Vdc, Current ranges from 0 - 4A to 0 - 275A
Optional Remote programming and monitoring of voltage and current, Parallel & master/slave operation up to 6 units & 90kW.
Optional IEEE 488.2 interface with LabVIEW driver, Optional SD Card slot
LAB-TC Series   10kW-2MW
Advanced IGBT based design
Voltage ranges from 0 - 52Vdc to 0 - 1000Vdc, Current ranges from 0 - 13A to 0 - 700A
Remote programming and monitoring of voltage and current, Remote sense, Parallel & Grid operation up to 2MW, Built in RS232.
Optional LabVIEW and C/C++

Product Summary

Our Laboratory Power Supplies range from 30 Watts up to 32kW and can be extended to 2 Mega Watts if required. Voltage ranges from 0 - 6Vdc to 0 - 1000Vdc, and current ranges from 0 - 0.5A to 0 - 700A. Single or Dual output models are available, and there is also the possibility to add an optional IEEE488.2 interface which is supplied complete with a LabVIEW driver on most models.

For more information please select the relevant link above or on the left of this page, or fill out and submit the form below.

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
Have an engineer contact me for an informal discussion

Name
Title
Company
Address
Specific Area of Interest
E-mail Address
Telephone Number

 

 

Home ] Up ] LD Series ] ZUP Series ] ZAS Series ] GEN Series ] XFR Series ] ZPS Series ] LABHP Series ] LABTC Series ] [ Site Map ]

Last modified: April 27, 2012